Merchandise Description
OSPC Orbital Valve Steering Equipment 16MPa Huge Displacement
Hydraulic Steering Unit ten sequence is integral hydraulic steering unit, the valve human body of rotary valve is integral construction, then the steering unit can integrate with cartridge valve, this sort of as the stress manage valve of the integral method.
Hydraulic Steering Unit ten collection is extensively used in the steering control system of different kinds of engineering cars, such as the steering system of numerous types of industrial and agricultural mobile equipment forklift, loader, street roller, tractor, merge harvester, and the ship CZPT and many others. The steering device can management the steering cylinder with bigger resistance drive by inputting minor force It’s simpler , adaptable and dependable The integral verify valve can avoid the technique pressure oil from anti-vibration , and avoid from “strike-hand” throughout the steering operation Integral force management valve can management the procedure pressure and the shock pressure of the steering system.
Item detail:
Â
More substantial inlet pressure | Â 16MPa |
Greater again pressure | Â 2.1MPa |
Larger doing work oil temperature | Â 80 |
Power steering torque | Â 1.75.0Nm |
Better manpower steering torque | Â 136Nm |
Open core unresponsive steering technique  |
The method has the subsequent characteristics and needs:
The center placement of the steering gear is in an open up condition (open main), that is, when the steering equipment is not doing work, the hydraulic oil passes through the steering gear and right returns to the oil tank.
Simple steering method, more commonly employed
The program ought to use a set pump for oil offer
Â
Specifications:
Â
Hanjiu | OEM | Â |
101s 1/ 2WD
HKUS100/ON OSPC100/ON |
100-90 (ninety Series), a hundred and ten-90 (90 Sequence) one hundred fifteen-90 (ninety Collection), a hundred thirty-90 (90 Series) one hundred forty-ninety (ninety Collection), 160-ninety (90 Sequence) a hundred and eighty-ninety (90 Series), fifty five-90 (90 Series) 60-ninety (ninety Series), 70-90 (90 Collection) 80-90 (90 Series), 85-ninety (ninety Sequence) |
Advantages of steering equipment:
Â
1. The steering technique is basic and lower in value |
two. The steering load does not immediately act on the steering wheel, and the operation is comfy |
three. The steering torque is lower, and the steering wheel can be continually turned freely |
4. There are numerous product specs and a vast selection of apprenticeships, ranging from eighty-1250mlr, which can meet numerous needs |
five. Valve blocks with different features and stress amounts can be connected according to the needs of the system |
6. In addition to the over rewards, the BZZ5 load-sensing complete hydraulic steering equipment also has the adhering to qualities:    ·Regardless of the load pressure and the pace of the steering wheel, the corresponding flow can be allocated in accordance to the demand of the steering oil circuit to make certain reliable, sensitive and light steering. |
Â
Â
Â
Â
Competitive Benefit:
Â
|
|
|
|
|
Â
Â
Our company:
Â
Elephant Fluid Electricity has been engaged in the hydraulic business given that the beginning of the twentieth century. It has a background of almost 20 years and has often been upholding the principles of “good quality 1st”, “credit rating first” and “zero grievance”, and has grow to be a new chief in the hydraulics sector. CZPT Fluid Electrical power insists on excellent goods, good services, and has been supplying customers with far better, much more complete hydraulic items, and continually.
Â
We are searching for very good long enterprise spouse and friendship.
Â
If you are fascinated in our merchandise, please get in touch with me, I will supply the ideal value help and high quality support.
I think we will create a very good and long-term cooperation.
To Be Negotiated | 1 Piece (Min. Order) |
###
After-sales Service: | 6-18months |
---|---|
Warranty: | 6-18months |
Material: | Cast, Ductile Iron, Steel, Bron |
Certification: | ISO, CE |
Application: | Agriculture Tractor |
Quality: | High Quality |
###
Samples: |
US$ 70/Piece
1 Piece(Min.Order) |
---|
###
Larger inlet pressure | 16MPa |
Greater back pressure | 2.1MPa |
Higher working oil temperature | 80 |
Power steering torque | 1.75.0Nm |
Greater manpower steering torque | 136Nm |
Open core unresponsive steering system |
###
Hanjiu | OEM | |
101s 100 CN | AL41291 AL55308 OSPC-160CN HKUS160/7/3 |
1550 (50 Series), 1640 (40 Series), 1750 (50 Series), 1850 (50 Series) 1950 (50 Series), 2040 (40 Series), 2140 (40 Series), 2250 (50 Series), 2450 (50 Series), 2650 (50 Series), 2850 (50 Series), 3040 (40 Series), 3050 (50 Series), 3140 (40 Series), 3150 (50 Series), 3340 (40 Series), 3350 (50 Series) |
###
Hanjiu | Massey FergusonOEM | Massey Ferguson |
101s 125 ON | K207419 4WD 125cc-3/4" HKUS125/ON |
240 (200 Series), 253 (200 Series) 261 (200 Series), 265 (200 Series) 275 (200 Series), 290 (200 Series) 298 (200 Series), 340 (300 Series) 342 (300 Series), 350 (300 Series) 352 (300 Series), 355 (300 Series) 360 (300 Series), 362 (300 Series) 365 (300 Series), 372 (300 Series) |
###
Hanjiu | Fiat OEM | Fiat |
101s 100 ON |
(5140383) / 5143319/ 2WD
HKUS100/ON
OSPC100/ON
|
100-90 (90 Series), 110-90 (90 Series) 115-90 (90 Series), 130-90 (90 Series) 140-90 (90 Series), 160-90 (90 Series) 180-90 (90 Series), 55-90 (90 Series) 60-90 (90 Series), 70-90 (90 Series) 80-90 (90 Series), 85-90 (90 Series) |
###
1. The steering system is simple and low in cost; |
2. The steering load does not directly act on the steering wheel, and the operation is comfortable; |
3. The steering torque is low, and the steering wheel can be continuously turned freely; |
4. There are many product specifications and a wide range of apprenticeships, ranging from 80-1250mlr, which can meet various needs; |
5. Valve blocks with different functions and pressure levels can be connected according to the needs of the system; |
6. In addition to the above advantages, the BZZ5 load-sensing full hydraulic steering gear also has the following characteristics: ·Regardless of the load pressure and the speed of the steering wheel, the corresponding flow can be allocated according to the demand of the steering oil circuit to ensure reliable, sensitive and light steering. |
###
|
|
|
|
|
To Be Negotiated | 1 Piece (Min. Order) |
###
After-sales Service: | 6-18months |
---|---|
Warranty: | 6-18months |
Material: | Cast, Ductile Iron, Steel, Bron |
Certification: | ISO, CE |
Application: | Agriculture Tractor |
Quality: | High Quality |
###
Samples: |
US$ 70/Piece
1 Piece(Min.Order) |
---|
###
Larger inlet pressure | 16MPa |
Greater back pressure | 2.1MPa |
Higher working oil temperature | 80 |
Power steering torque | 1.75.0Nm |
Greater manpower steering torque | 136Nm |
Open core unresponsive steering system |
###
Hanjiu | OEM | |
101s 100 CN | AL41291 AL55308 OSPC-160CN HKUS160/7/3 |
1550 (50 Series), 1640 (40 Series), 1750 (50 Series), 1850 (50 Series) 1950 (50 Series), 2040 (40 Series), 2140 (40 Series), 2250 (50 Series), 2450 (50 Series), 2650 (50 Series), 2850 (50 Series), 3040 (40 Series), 3050 (50 Series), 3140 (40 Series), 3150 (50 Series), 3340 (40 Series), 3350 (50 Series) |
###
Hanjiu | Massey FergusonOEM | Massey Ferguson |
101s 125 ON | K207419 4WD 125cc-3/4" HKUS125/ON |
240 (200 Series), 253 (200 Series) 261 (200 Series), 265 (200 Series) 275 (200 Series), 290 (200 Series) 298 (200 Series), 340 (300 Series) 342 (300 Series), 350 (300 Series) 352 (300 Series), 355 (300 Series) 360 (300 Series), 362 (300 Series) 365 (300 Series), 372 (300 Series) |
###
Hanjiu | Fiat OEM | Fiat |
101s 100 ON |
(5140383) / 5143319/ 2WD
HKUS100/ON
OSPC100/ON
|
100-90 (90 Series), 110-90 (90 Series) 115-90 (90 Series), 130-90 (90 Series) 140-90 (90 Series), 160-90 (90 Series) 180-90 (90 Series), 55-90 (90 Series) 60-90 (90 Series), 70-90 (90 Series) 80-90 (90 Series), 85-90 (90 Series) |
###
1. The steering system is simple and low in cost; |
2. The steering load does not directly act on the steering wheel, and the operation is comfortable; |
3. The steering torque is low, and the steering wheel can be continuously turned freely; |
4. There are many product specifications and a wide range of apprenticeships, ranging from 80-1250mlr, which can meet various needs; |
5. Valve blocks with different functions and pressure levels can be connected according to the needs of the system; |
6. In addition to the above advantages, the BZZ5 load-sensing full hydraulic steering gear also has the following characteristics: ·Regardless of the load pressure and the speed of the steering wheel, the corresponding flow can be allocated according to the demand of the steering oil circuit to ensure reliable, sensitive and light steering. |
###
|
|
|
|
|
How to Design a Forging Spur Gear
Before you start designing your own spur gear, you need to understand its main components. Among them are Forging, Keyway, Spline, Set screw and other types. Understanding the differences between these types of spur gears is essential for making an informed decision. To learn more, keep reading. Also, don’t hesitate to contact me for assistance! Listed below are some helpful tips and tricks to design a spur gear. Hopefully, they will help you design the spur gear of your dreams.
Forging spur gears
Forging spur gears is one of the most important processes of automotive transmission components. The manufacturing process is complex and involves several steps, such as blank spheroidizing, hot forging, annealing, phosphating, and saponification. The material used for spur gears is typically 20CrMnTi. The process is completed by applying a continuous through extrusion forming method with dies designed for the sizing band length L and Splitting angle thickness T.
The process of forging spur gears can also use polyacetal (POM), a strong plastic commonly used for the manufacture of gears. This material is easy to mold and shape, and after hardening, it is extremely stiff and abrasion resistant. A number of metals and alloys are used for spur gears, including forged steel, stainless steel, and aluminum. Listed below are the different types of materials used in gear manufacturing and their advantages and disadvantages.
A spur gear’s tooth size is measured in modules, or m. Each number represents the number of teeth in the gear. As the number of teeth increases, so does its size. In general, the higher the number of teeth, the larger the module is. A high module gear has a large pressure angle. It’s also important to remember that spur gears must have the same module as the gears they are used to drive.
Set screw spur gears
A modern industry cannot function without set screw spur gears. These gears are highly efficient and are widely used in a variety of applications. Their design involves the calculation of speed and torque, which are both critical factors. The MEP model, for instance, considers the changing rigidity of a tooth pair along its path. The results are used to determine the type of spur gear required. Listed below are some tips for choosing a spur gear:
Type A. This type of gear does not have a hub. The gear itself is flat with a small hole in the middle. Set screw gears are most commonly used for lightweight applications without loads. The metal thickness can range from 0.25 mm to 3 mm. Set screw gears are also used for large machines that need to be strong and durable. This article provides an introduction to the different types of spur gears and how they differ from one another.
Pin Hub. Pin hub spur gears use a set screw to secure the pin. These gears are often connected to a shaft by dowel, spring, or roll pins. The pin is drilled to the precise diameter to fit inside the gear, so that it does not come loose. Pin hub spur gears have high tolerances, as the hole is not large enough to completely grip the shaft. This type of gear is generally the most expensive of the three.
Keyway spur gears
In today’s modern industry, spur gear transmissions are widely used to transfer power. These types of transmissions provide excellent efficiency but can be susceptible to power losses. These losses must be estimated during the design process. A key component of this analysis is the calculation of the contact area (2b) of the gear pair. However, this value is not necessarily applicable to every spur gear. Here are some examples of how to calculate this area. (See Figure 2)
Spur gears are characterized by having teeth parallel to the shafts and axis, and a pitch line velocity of up to 25 m/s is considered high. In addition, they are more efficient than helical gears of the same size. Unlike helical gears, spur gears are generally considered positive gears. They are often used for applications in which noise control is not an issue. The symmetry of the spur gear makes them especially suitable for applications where a constant speed is required.
Besides using a helical spur gear for the transmission, the gear can also have a standard tooth shape. Unlike helical gears, spur gears with an involute tooth form have thick roots, which prevents wear from the teeth. These gears are easily made with conventional production tools. The involute shape is an ideal choice for small-scale production and is one of the most popular types of spur gears.
Spline spur gears
When considering the types of spur gears that are used, it’s important to note the differences between the two. A spur gear, also called an involute gear, generates torque and regulates speed. It’s most common in car engines, but is also used in everyday appliances. However, one of the most significant drawbacks of spur gears is their noise. Because spur gears mesh only one tooth at a time, they create a high amount of stress and noise, making them unsuitable for everyday use.
The contact stress distribution chart represents the flank area of each gear tooth and the distance in both the axial and profile direction. A high contact area is located toward the center of the gear, which is caused by the micro-geometry of the gear. A positive l value indicates that there is no misalignment of the spline teeth on the interface with the helix hand. The opposite is true for negative l values.
Using an upper bound technique, Abdul and Dean studied the forging of spur gear forms. They assumed that the tooth profile would be a straight line. They also examined the non-dimensional forging pressure of a spline. Spline spur gears are commonly used in motors, gearboxes, and drills. The strength of spur gears and splines is primarily dependent on their radii and tooth diameter.
SUS303 and SUS304 stainless steel spur gears
Stainless steel spur gears are manufactured using different techniques, which depend on the material and the application. The most common process used in manufacturing them is cutting. Other processes involve rolling, casting, and forging. In addition, plastic spur gears are produced by injection molding, depending on the quantity of production required. SUS303 and SUS304 stainless steel spur gears can be made using a variety of materials, including structural carbon steel S45C, gray cast iron FC200, nonferrous metal C3604, engineering plastic MC901, and stainless steel.
The differences between 304 and 303 stainless steel spur gears lie in their composition. The two types of stainless steel share a common design, but have varying chemical compositions. China and Japan use the letters SUS304 and SUS303, which refer to their varying degrees of composition. As with most types of stainless steel, the two different grades are made to be used in industrial applications, such as planetary gears and spur gears.
Stainless steel spur gears
There are several things to look for in a stainless steel spur gear, including the diametral pitch, the number of teeth per unit diameter, and the angular velocity of the teeth. All of these aspects are critical to the performance of a spur gear, and the proper dimensional measurements are essential to the design and functionality of a spur gear. Those in the industry should be familiar with the terms used to describe spur gear parts, both to ensure clarity in production and in purchase orders.
A spur gear is a type of precision cylindrical gear with parallel teeth arranged in a rim. It is used in various applications, such as outboard motors, winches, construction equipment, lawn and garden equipment, turbine drives, pumps, centrifuges, and a variety of other machines. A spur gear is typically made from stainless steel and has a high level of durability. It is the most commonly used type of gear.
Stainless steel spur gears can come in many different shapes and sizes. Stainless steel spur gears are generally made of SUS304 or SUS303 stainless steel, which are used for their higher machinability. These gears are then heat-treated with nitriding or tooth surface induction. Unlike conventional gears, which need tooth grinding after heat-treating, stainless steel spur gears have a low wear rate and high machinability.
editor by czh 2022-12-24